Manufactured from 100 percent recycled plastic materials. Each kit includes everything needed for a standard Edging. Installation: four 8m Lengths of edging, four locking connectors and (16) 20cm Spiral spikes. All components are black in color.*Size and weight are approximate
plastic lawn edging Product Overview
Assembled dimension: 8m Length x 38mm Height
No digging necessary for installation
Unique, patented locking connection system
Can also be used as a No-Dig landscape edging around any planting bed or tree for a quick, timesaving professional look
Unique, flexible L-shape 38mm high paver edging system designed for use with most standard pavers.
Box of straight plastic edging and a bag of 20cm plastic stakes. A few plastic section links. Parts seems sturdy enough for light work. Simple instruction sheet.
Simple flat-edging solution. Fairly sturdy pieces. Stakes adequate for most uses, but maybe not for heavy duty support. Adds significant support to patio block flooring.
8M length Multipurpose Edging Installation Guidelines
for use as landscape edging;
step 1
No digging required. Using a spade or shovel, clear area where edging is to be placed of turf and debris. For best results, edging should be placed on clear, level ground.
step 2
Slide connectors into track system with locking pegs facing toward pre-drilled holes on each edging piece. Locking pegs should click into pre-drilled holes on each of the edging pieces, providing a clean, locked joint without overlapping.
Step 3
Place edging on cleared surface with the anchoring tabs facing toward the planting bed. Note that installers may find it easier to connect all pieces before positioning edging prior to anchoring.
Step 4
Drive spikes vertically, through holes on horizontal anchoring tabs. Recommended spike placement is a maximum distance of 60cm apart. Use extra spikes at or near curves or for extra support when holding back heavier types of decorative stone.
Step 5
Tightly pack soil around edging and install landscape fabric and ground cover (decorative stone, mulch, etc.) to the top of the edging.
for use as brick paver edging:
1.Install compacted aggregate base. Consult you paver supplier for proper width and depth for the specific paver application.
2.Slide connectors into track system with locking pegs facing toward pre-drilled holes on each edging piece. Locking pegs should click into pre-drilled holes on each of the edging pieces, providing a clean, locked joint without overlapping.
3.Determine proper positioning and install edging directly on top of compacted aggregate base prior to screeding sand and setting pavers.
4.Multipurpose Edging can be installed with anchoring tabs for spikes underneath or adjacent to the edge of the pavers. Secure edging by driving anchoring spikes through anchoring tabs into compacted base. Recommended spike placement is a maximum of 60cm apart。
Backfill perimeter with topsoil. Seed, sod or install groundcover, as specified.